Pair of five spoke 1/8" Baltic Birch Plywood wheels with 4 ply washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
Pair of five spoke 1/8" Baltic Birch Plywood wheels with 4 ply washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
Pair of three spoke 1/8" Baltic Birch Plywood wheels with 4 ply washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
Pair of three spoke 1/8" Baltic Birch Plywood wheels with 4 ply washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
Pair of three spoke 3/32" Delrin wheels with 4 Delrin washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
Pair of three spoke 3/32" Delrin wheels with 4 Delrin washers.
1/8" (3mm) axle hole.
Add your own rubber band tires!
|
4 off 1/8"" Steel Push Retainers
|
1" diameter, one pair.
Laminated from balsa and aircraft ply discs & washers, then sand while spinning on an arbor in your drill press.
|
1 1/2" diameter 1/16" thick ply disc with brass eyelet hub, one pair.
Axle hole for 0.047" piano wire.
|
1 1/2" diameter, one pair.
Laminated from balsa and aircraft ply discs & washers, then sand while spinning on an arbor in your drill press.
|
2" diameter, one pair.
Laminated from balsa and aircraft ply discs & washers, then sand while spinning on an arbor in your drill press.
|
These easy build very light 5 spoke wheel kits with a vintage look will
add realism to your "old" aircraft project. Especially suited to indoor RC & FF models.
Laser cut from aircraft plywood, each kit makes one pair of wheels.
|
These easy build 5 spoke wheel kits with a vintage look will
add realism to your "old" aircraft project.
Laser cut from aircraft plywood, each kit makes one pair of wheels.
| | |