Price: It's too cold to ship at the moment.
112g Deluxe Alphatic Resin, slower drying than PVA, sands better than PVA.
|
Price: It's too cold to ship at the moment.
112g Special modelling PVA glue that contains no fillers. "The 5 minute white glue".
|
Price: It's too cold to ship at the moment.
500g Special modelling PVA glue that contains no fillers. "The 5 minute white glue".
|
Price: It's too cold to ship at the moment.
Ultra thin, foam safe, oderless,penetrating!
Bonds: wood, foam, plastic,carbon fiber, GRP.
50ml bottle, comes with dispensing nozel.
|
Price: It's too cold to ship at the moment.
Ultra thin, foam safe, oderless,penetrating!
The low viscosity formula and needle applicator ensure easy application directly onto open or pre-assembled joints typically found in Laser cut kits.
|
Price: It's too cold to ship at the moment.
Wax adhesive for holding miniatures in place
repositionable and removable with soap and water.
Great for holding small screws on driver!
|
Clear, tough, gap filling adhesive.
Bonds foam, plastic & metal.
Produces flexiblebonds in ways other glues cannot.
|
For rapid foam modelling. Very high tack glue. Strong hold, allows adjustment.
Dries clear, flexible. Ideal for foam model aircraft. Bonds: Depron, white, blue and EPO foams, wood and plastic.
|
Price: It's too cold to ship at the moment.
150ml Water clean up 'Heat Activated' adhesive from Deluxe Materials for all kinds of film to wood and film itself. Coverite Coverlite & other heat shrink covering materials.
|
Price: It's too cold to ship at the moment.
Clear drying paste for bonding tissue paper used on traditional model airplanes.
The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing.
|
A specially formulated water soluble dope for shrinking, strengthening and wind-proofing model tissue paper or Polyspan.
|
250g for protecting foam and wood surfaces.
|
Primer to promote adhesion of Cyano to
difficult shiny plastics and foam 50ml
Including EPP, EPO, Polypropylene, silicone and nylon.
|
Price: It's too cold to ship at the moment.
Water based laminating and finishing resin for balsa and foam models.
|
Super thin epoxy for wing skinning, laminating and moulding.
|
0.6oz/sq.yd or 24g/sq.m
Size: 2 sq.m
Super lightweight fiberglass cloth for surfacing and reinforcing
|
1.5 oz/sq.yd or 51g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
2.3 oz/sq.yd or 78g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
1oz/sq.yd or 34g/sq.m
Size: 1 sq.m
Lightweight fiberglass cloth for laminating, surfacing and reinforcing
|
Milled Carbon Fiber 50ml
for the ultimate strengthening of epoxy resin
|
10g/sq.m (0.3oz/sq.yd)
Carbon Fiber surfacing and reinforcing tissue
|
100g/sq.m (3oz/sq.yd)
Teasable Carbon Fiber
for contouring or shaping
75 x 25 cm
|
Lightweight, easy sanding filler for resin
250ml
|
Strong, lightweight filler which sands easily.
|
Filler powder for use with Cyano 40g
for fast strong repairs and small fillets
|
High density non toxic powder, can be set in place with a drop of CA glue!
240g
|
For precise, accurate application of water based glues.
|
Pack of six micro tips and PTFE tubing for precise anti-clog application of CA glues.
|
Wax adhesive for holding miniatures in place
repositionable and removable with soap and water.
Great for holding small screws on driver!
|
10 heavy duty measuring/mixing cups.
Graduations 1 - 4 tsp.
No ribs on inside for easy mixing.
|