RRC Balsa Stripper

We recommend cutting from both sides od sheet, by setting cut depth to slightly more than half wood thickness.  Make first cut, then flip wood over and make second cut.  Strips are straighter if you do this.
Width of the strip is very repeatable as it is controled by fixed width spacers.  With straight grained wood it will cut 1/64" strips witout any problem, try that with another stripper!
The blade tip is better supported than the typical stripper's #11 blade, as the point is a 90 deg corner.
When blade is nolonger sharp enough, reverse blade for a new cutting edge.
Replace worne blade with any standard single edge razor blade.