Helicopter rotor hanger loop and button for 1/8" motor sticks, and four rotor hubs for 0.020" shaft and 0.5 - 0.8 mm carbon rods. Weight 0.8g total. Prop shaft, thrust washers and carbon rods not included.
|
Helicopter rotor hanger loop and button for 1/8" motor sticks, and four rotor hubs for 0.020" shaft and 1.0 - 1.2 mm carbon rods. Weight 0.97g total. Prop shaft, thrust washers and carbon rods not included.
|
Precise digital scale measures 0 - 300g
with a resolution of 0.01g.
A necessary tool for indoor rubber power.
|
5 Nose buttons for 0.020" prop shaft.
(Fits all loop hangers.)
|
5 Nose buttons for 0.026" prop shaft.
(Fits all loop hangers.)
|
5 Nose buttons for 0.032" prop shaft.
(Fits all loop hangers.)
|
Silicon based Rubber Lubricant
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #00 - 3/32" OD for 0.010-0.015" shaft
|
Hanger loop for 1/8" motor sticks, nose button for 0.020" prop shaft, prop hub for 1.0 - 1.2 mm carbon rods. Hub has a free wheel ramp built in. Prop shaft, thrust washers and carbon rods not included.
|
Hanger loop for 1/8" motor sticks, nose button for 0.026" prop shaft, prop hub for 1.0mm carbon rods. Prop shaft, thrust washers and carbon rods not included.
|
Hanger loop for 1/8" motor sticks, nose button for 0.032" prop shaft, and prop hub for 1.0mm carbon rods. Prop shaft , thrust washers and carbon rods not included.
|
Torque meter kit, Carbon Fiber body tube, swivels to align with rubber. Approximate range 0 - 2 oz-in (0.014 N-m), suitable for up to 1 loop of 1/8" Super Sport.
|
Measures pitch in inches at 70% radius for 5 1/2" props on prop hanger or bare shaft.
|
Measures pitch in inches at 70% radius for 6" props on prop hanger or bare shaft.
|
Hanger loop for 1/8" motor sticks, nose button for 0.020" prop shaft. Three sets included. Glue hanger loop to motor stick with CA.
This allows you to easily change out prop and shaft assembly on your stick models.
|
Used to increase the pitch of commercial rubber power plastic props. Push prop down wedge cutout and let it cold flow, or heat gently in a very cool oven for a few mins.
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #3 - 7/32" OD for 1/16" shaft
|
Hanger loop for 1/8" motor sticks, nose button for 0.026" prop shaft. Three sets included. Glue hanger loop to motor stick with CA.
This allows you to easily change out prop and shaft assembly on your stick models.
|
Measures pitch in inches at 70% radius for 7" props on prop hanger or bare shaft.
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #4 - 1/4" OD for 1/16"- 5/64" shafts
|
Hanger loop for 1/8" motor sticks, nose button for 0.032" prop shaft. Three sets included. Glue hanger loop to motor stick with CA.
This allows you to easily change out prop and shaft assembly on your stick models.
|
6mm OD, 2mm ID, ~3mm thick. Fits 1/32" prop shafts.
Hardened steel end caps with 6 balls in brass cage.
|
6mm OD, 2mm ID, ~3mm thick. Fits 3/64" prop shafts.
Hardened steel end caps with 6 balls in brass cage.
|
6mm OD, 2mm ID, ~3mm thick. Fits 1/16" prop shafts.
Hardened steel end caps with 6 balls in brass cage.
|
6mm OD, 2mm ID, ~3mm thick. Fits 2.0mm prop shafts.
Hardened steel end caps with 6 balls in brass cage.
|
Inserter stick tips with 1/8" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 5/32" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 3/16" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
|
|