Howard DGA3 "Pete" foamy

A slight departure from our norm!  This is the first in a series of foam racers for indoor or outdoor flying.  It is intended for three channel control (ailerons, elevator and throttle), you could easily coupled the rudder to the ailerons or add a third servo and add full rudder control.

It is a very complete kit.  All you need to provide is the 10g outrunner motor, prop, 6A ESC, reciever, 2 off 3.7g or similar servos, battery, glue & paint; everything else is in the kit.  Foam panels even has the panel lines engraved in them (one side of wing, stab and fin) and the kit even includes laser cut stencils for the N numbers and race numbers.
Flying weight is 80 - 90g.

This is a fast little ship, not for the novice pilot.....