Inserter stick tips with 5/16" fork width.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 1/8" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 5/32" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 3/16" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
Inserter stick tips with 1/4" fork width.
Includes a convenient hanging loop for other end of stick.
Glue and bind to your own dowel rod.
|
1/16" Shepherd's Hook Prop Shaft
~5" long, Loop ID 1/4"
|
2mm FAI Front End Assembly with best bearing
|
3/32" FAI Front End Assembly with best bearing
|
|
Open Hook for Peanut Scale
|
DT Band Hook.
~ 5/16" x 1/2" x 1/10"
|
Open Hook for P30 and similar
|
Open Hook for Medium size (Jabberwock) models
|
Al Bobbin
OD 3/4", ID 1/8", width 1/2"
|
Open Hook for large models
formerly known as CR-104
|
T-HOOK FOR LARGER MODELS LIKE THE LANZO STICK AND MODERN F1B'S
|
AN EXTENDED STIRRUP HOOK, USE WITH A SHORTER MOTOR
|
A SHORT STIRRUP HOOK FOR LARGER MODELS
|
A MEDIUM STIRRUP HOOK FOR LARGER MODELS
|
A LONG STIRRUP HOOK FOR LARGER MODELS
|
|
|
|
|
~1" Long
These are not from FAI stock which are no-longer available.
They are hand made by Retro RC LC, hence the higher price.
Please, only one per order, as they take quite a while to make.
|
|
|
Rubber Winding Ring - 5 off
Ideal for P-30 or smaller models
ID 0.310", thickness 0.105"
|
Al Winding or Tow Line Ring
ID 3/8", thickness 3/32"
|
Laser-cut Hard Teflon Thrust Washers, 6 off
Size #1 - 1/8" OD for 1/32" shaft
|